The Process For San Antonio Car Window Replacement

By Eric Gray


There are very many things that can damage the windshield of your automobile. These include road debris and traffic accidents. A damaged windscreen or other windows of your car exposes you to the weather and also theft. Therefore, it is essential that San Antonio car window replacement is sought early. When faced with such a problem, many people rush to their auto dealers to get it fixed.

The good news is that you do not have to hire a professional to fix your car windows. You can learn to do it on your own. However, you should carry out some preparation. To begin with, you must eliminate all plastic moldings around this glass that you intend on replacing. Since these moldings are held in place using clips, you should remove these clips first. Be very careful not to damage these clips. Make sure you use the right angle when removing the auto glass.

One has to cut the urethane to set the windshield free. This highly strong and yet flexible polymer can be cut from the inside or outside. The person should be very careful when cutting this polymer. Any mistake could cause the mirror to break and make a muddle. One can choose to use an extended razor or power cutters to perform this task. However, the latter causes more damage to pinch weld.

The process of removing this massive screen from the automobile is a bit hectic. Attempting to do so alone will be in vain. Therefore, ensure that you have someone else to help with this part. With both front car doors open, reach out and push this glass away from the window frame. This will create space for you to hold the component and carry it to safety.

Once the old windshield has been set aside, the person can now begin preparing the pinch-weld. Use plain water and a brush to clean away all dirt and other contaminants. The presence of these foreign bodies will reduce adhesion of the windscreen and urethane. If the polymer is in excess, one should also consider trimming it to a suitable size. Also, any rusty parts of the metallic weld should be thoroughly sanded to eliminate the traces of rust.

The application of prime is also a very crucial part of this procedure. Priming improves the strength with which the urethane and windscreen stick together. It also eliminates any possibilities of future rusting of the metal parts of the vehicle. However, before priming, you owe to cover all parts that have not been sanded and those that expose the interior of your automobile.

When priming, particular emphasis should be given to the pinch-weld. This is done to ensure that it accept the urethane without complications. A caulking gun will be quite helpful for this task. If you do not have this equipment, you can buy one at your local dealers in San Antonio, TX.

In finalizing this process, you will have to place the new windshield on the window frame. This must be done very carefully to prevent damaging the auto glass. Also, one should avoid touching and hence contaminating the frit band as this would reduce adhesion. After completion of the installation process, allow the urethane some time to




About the Author:



LihatTutupKomentar
Cancel